Tool - Bead Mandrels - Assorted Sizes
These Are High Quality Steel, No Easy Melters!!
Mandrels (12) 1/16" (Highest Quality Steel) $6.50 [Add to Cart]
[View Cart]
Mandrels (12) 1/8" (Highest Quality Steel) $9.50 [Add to Cart]
[View Cart]
Mandrels (12) 3/32" (Highest Quality Steel) $7.00 [Add to Cart]
[View Cart]
|
Tool - Brass Glass Shaper (Stick Shift)
$33.00
different applications on molten glass.
[Add to Cart]
[View Cart]
|
Tool - Bead Cleaner (4-Piece Unit)
$13.50
OUT OF STOCK Pin Vise Device Diamond Coated Bead Hole Cleaner. Mandrel holder, bead hole cleaner and dresser. The pin vise is made of aluminum and is 1/2" in diameter. It can hold your mandrels while you make beads too. Inside the handle are three diamond bits. One is a dressing tool, 5mm in length and 4mm wide, it's a tapered point for cleaning up bead holes. The second bit is a pointed bead hole cleaning tool. The pointed end is about 1/2mm in diameter and the base is 1mm in diameter. The third bit is a pointed bead hole cleaning tool, about 3/4mm in diameter and the base is 3mm in diameter. I Like this tool due to it's a unit, you don't loose the bits, also love the diamond coating on the tips.
[Add to Cart]
[View Cart]
|
Tool - Looped Hemostat 7"
$7.75
7" looped Hemostat
Great for using the rest of your rod when it's just too hot to hold!! Also, great for holding small lampworked objects just off the punty!!
[Add to Cart]
[View Cart]
|
Tool - Looped Hemostat 9"
$9.75
9" looped Hemostat
Great for holding your glass rod when it gets just too small and HOT to hold, also super for holding small lampwork objects right off the punti!! A Must Have!!
[Add to Cart]
[View Cart]
|
Tool - Graphite Stump Shaper
$25.00
Graphite Stump Shaper. Graphite STUMP Shaper. 2.5" long x 2" wide. One side has a 3/8" taper for half it's length and a flat edge for the other half. The opposite side has a 1/4" thickness tapering to 1/16" at it's end. The top of the paddle is machined to a knife edge.
[Add to Cart]
[View Cart]
|
Tool - Brass Stump Shaper Professional
$35.00
OUT OF STOCK Brass stump shaper: Great all around tool. I Have tried all paddles, stump shapers, Graphite is Nice, But Brass Will Tend To Hot Glass. I Consider this Tool To Be One Of The Very Best Investments I made For My Flameworking. It certainly was a treat to use one of these!! It's Simply the Best, It works well for moving clear glass while encasing beads.
Brass Shaper Itself is 2" Long and 1 5/8" wide, Total Length is 8", Easy to handle, Coated Handle for Firm Grip, Nice Tool. I would be lost without my Absolute Favorite Tool.
[Add to Cart]
[View Cart]
|
Tool - Graphite Marble Mold - Roller Paddle (2 well)
$23.50
*FIREWORKS* BEAD MAKING Graphite Roller Paddle - 2-well
(Measures 1 3/4" by 3 1/2")This PADDLE has 2 purposes, 1 side can be used to shape your glass beads and the other is to allow you to make round beads, marbles and ball shape forming, there are 2 inserts (called WELLS) that you can roll your hot glass in for perfect ball shape, marbles shapes, ect, 1 is 3/4" and the other is 1".
[Add to Cart]
[View Cart]
|
Tool - Graphite Octagonal REAMER 5" PROFESSIONAL
$30.00
Graphite Octagonal Reamer 13 1/2" with handle. Graphite Reamer is an 8 sided octagon, tip is 5" long. Octagonal Reamer is For shaping and manipulating hot glass projects. Expand holes in the sides or ends of tubing, Use as a Large Pick to make Big Centers in Flowers. Use To make a Loop At the Top Of an Ornament or Hanging Glass Sculpture of any size. Eight sided, tapered graphite with handle.
Tapered 2MM - 15M x 5" long
[Add to Cart]
[View Cart]
|
Tool - Graphite Pad Surface 6"x6"
$25.00
Smooth graphite pad for marving.
Works great for holding silver or gold leaf, frits and enamels Millefiori, ect..
Glass will not stick to it.
Graphite Platte is 6"x6"x3/8"
[Add to Cart]
[View Cart]
|
Tool - Parallel Press Masher PROFESSIONAL
$35.00
OUT OF STOCK Bead Press/ BEAD MASHER For A Very Easy Squeeze. - Has Accurate Parallel Press Action with adjustable set screw that allow's two, 2" square Stainless Steel Plates to close to any predetermined thickness, uses Spring Loaded Action for Super Ease On Hands when Closing in on Molten Glass and Opens By Itself when your done, These Are Hand Made and Accurate. Press Plates are 1/8" thick, press plates are 2" square. Only If The very Best Will Do.
[Add to Cart]
[View Cart]
|
Tool - Parallel Press - Bead Masher
$22.50
These Are Custom Made For Our Company, This is Not A Fireworks Tool. Good Quality for an economy Priced Masher!!
This Is To Shape (Squash or Flatten) your Molten Glass, If Your Lampworking This Tool is a Must Have!! Simply place molten bead between paddles and squeeze. Tool Has an adjustable press height for setting the thickness you would like your beads to be. Press is 2" Square. - Make square beads, Lollipop shaped beads, I use it a lot to get my round shape back in shape also, it helps round your bead to the correct dimentions all the way around!!
[Add to Cart]
[View Cart]
|
Tool - Mini Masher Pro 3/4"
$15.00
Glass Bead Making Mini MASHER 3/4" x 5 1/2"- Stainless Steel - Quality Little Tool.
[Add to Cart]
[View Cart]
|
Tool - STAR MASHER MURRINI Maker
$16.50
OUT OF STOCK This is a Professional Tool -STAR MASHER - This tool has many Funcions!! 1 1/2" long star leg top is 3/8". - Use it to make a STAR MURRINI. Your form a 3/4" gather of glass (approximately 2" of a 6mm rod) Punty an end, heat at pinch point and pinch along the cylinder side to form a star leg, repeat as needed, then pull to desired length!!
Use it on a bead to form a star shape, If you look at the form in the 2 photo's, you can see you can make funky shaped beads with this also. The Optic Molds are Very High Priced, This is affordable, Really Cool Tool!!
[Add to Cart]
[View Cart]
|
Tool - Staight Micro Mashing Tweezer - Mini Detail Aide
$4.50
This Pair Of Mashers has a Nice sharp and evenly butted Tip for Nice accurate pinching of molten glass, 4 1/2" long tweezers have small flat thin pads measuring 1/4" x 5/8". Perfect Edge on this tool.
[Add to Cart]
[View Cart]
|
Tool - LEAF MASHER Bead Making Press
$16.50
LEAF MASHER or LEAF PRESS!! - Add some leaf designs to your beads, or sculptures, windchimes, ect. - Leaf size itself is 1 1/2" long by 1" wide, Awesome tool, Great Gift for someone who plays with a torch!! This Just adds a lot of spark to you work, you can do many things including flower petals with this, Just so cool!!
[Add to Cart]
[View Cart]
|
Tool - Angled Micro Mashing Tweezers - Mini Detail Aide
$4.50
For those tough to get into spots, These Come in So Handy all the time!!
I straighten my decorations with these, those lines that just won't be straight, Perfect Tool!! Length of tool is 4 3/4" long tweezers have small flat angled thin pads measuring 1/4" x 1/2". Excellent for tiny detail work in tight places.
[Add to Cart]
[View Cart]
|
Tool - TWEEZER MASHER 8" by 3/4"
$10.00
Glass Bead Making TWEEZER MASHER 3/4" x 8"- Stainless Steel. Nice size for beads.
[Add to Cart]
[View Cart]
|
Tool - TWEEZER 7" (Fine) Pointed Stainless Steel
$5.00
This is My Personal favotite tweezer, I use it for everything!! I Would be lost without it. Intricate and Affordable.
[Add to Cart]
[View Cart]
|
Tool - TWEEZER SET - 3 PACK
$15.00
3 different size "Fireworks" By Diamond Tech. These Tweezers are serrated and can add some texture to your designs, the 3 sizes are awesome and all come in handy for all torch work tasks, Pulling stringers, ect.
[Add to Cart]
[View Cart]
|
Tool - Tweezers - 4-Pack (Serrated or Blunt)
4 Pack Tweezers, 4 Differnt Sizes, 12",10", 8",6", We Have Serrated Tips and Blunt Tips (smooth) Just select The Set You Prefer. I sell as much of One as the Other. They are Both as popular. The serrated tips would grab better, the smooth tips won't leave the serration in your glass. It's a Matter Of Preference.
Tool - TWEEZER SET - 4 PACK - (Blunt Tip) $17.50 [Add to Cart]
[View Cart]
Tool - TWEEZER SET - 4 PACK - (Serrated Tip) $17.50 [Add to Cart]
[View Cart]
|
Tool - Flaring Tool
$4.00
Hot Glass Bead Making Flaring Tool - Stainless Steel
[Add to Cart]
[View Cart]
|
Tool - RAZOR SCULPTING TOOL
$4.00
Glass Bead Making RAZOR SCULPTING TOOL
[Add to Cart]
[View Cart]
|
Tool - Spatula Tool Set (4-Pack) Stainless Steel
$10.00
Spatula Tool 4-Pack STainless Steel. - Tools are 7 1/4" Long, 4 tools, 8 great shapes, great for shaping Glass Beads and doing small detail Work. Great Set of Little tools!! Very Handy!! Pretty Cool!! Not the Regular cheapie tools, these have some weight to them and are stainless Steel!!
[Add to Cart]
[View Cart]
|
Tool - Rod Nipper
$15.00
OUT OF STOCK8" Glass Rod Nipper
This Tool is Used to cut Glass Rods, Millefiori Cane, Stringers and Latticino, this is a heavy duty tool, a professional tool with rubber Guard Handles.
[Add to Cart]
[View Cart]
|
Tool - Tool Rest or Rod Rest (15-Hole)
$6.50
OUT OF STOCK Stainless Steel Tool Rest, 15 Slots Verses The 10 Slot shown, Most are 10 Slot, we Get these Made Special. Comes In More Then Handy and saves a lot of time, I sit mine to the right of my torch with all my Tools and rods ready to grab, no distractions means not getting scorched, it's a good item for safety , lay your just used rods with the hot end away from you.
[Add to Cart]
[View Cart]
|
Tool - Bead Hole Cleaning "Replacement Diamond Coated Tips" (3-pack)
$8.50
Set of Three Replacement Diamond Coated Bead Hole Cleaners. These Fit any dremel or Holder for Cleaning Beads, Standard size bits. If Your Bits are Wearing out, it's cheaper to replace them then to have to buy the whole reamer set again.
[Add to Cart]
[View Cart]
|
Tool - Kemper Bead Hole Cleaner 1/16" wire size Small
$4.50
The Kemper Bead Hole Cleaner is coated with the finest diamond abrasive for a more effective and efficient removal of bead release residue. To use, simply push the narrow diamond coated rod back and forth through the hole in your bead. This Reamer is Great For All Size Bead holes, Wire is 1/16". We Have 1/16 Tiny Wire Cleaners also. This Wire fits perfectly inside 1/16" Mandrel holes but can be used for any size bead hole.
[Add to Cart]
[View Cart]
|
Tool - Kemper Bead Hole Cleaner 1/32" wire size Tiny
$4.50
OUT OF STOCK
The Kemper Bead Hole Cleaner is coated with the finest diamond abrasive for a more effective and efficient removal of bead release residue. To use, simply push the narrow diamond coated rod back and forth through the hole in your bead. This Reamer is Great For All Size Bead holes, Wire is 1/32". This Can be used to Clean all bead Hole Sizes.
[Add to Cart]
[View Cart]
|
Tool - Hot Glass Sheers (Red Handle - 8")
$9.00
Stainless Steel, Spring Loaded, Leather Strap for Safe Keeping, Handles are Comfort Coated, 8" Long, Nose is 3" Long , Come in Carrying Case.
[Add to Cart]
[View Cart]
|
Tool - Hot Glass Sheers (Gold Handle) 7 .5"
$9.00
OUT OF STOCK 1 Pair Gold Handle Hot Glass Sheers
Used To cut molten glass, Overall Length is 7 1/2", blade is 3" long, wide Holes for fingers make this old world design more efficient in the Hot Glass shop. Bigger Holes, Easier to grab.
[Add to Cart]
[View Cart]
|
Tool - Bent Rake (Wood Handle)
$4.50
Used for Raking (dragging) Molten glass (feathering) to make designs on Your Lampworked beads. Tool is 6 3/4" Long, tip is chiseled to a point for easy raking, bent to help in the process, 3/32" mandrel base. Wooden Handle.
Do Not use this tool in the heat, Heat your glass and remove from the flame then use the stainless steel point to drag your glass.
If Used in the flame the glass will stick to the stainless steel like a steel mandrel.
This item is inexpensive and great for learning, It's great for professionals as well, but when you learn more, you will want the nice tungston steel that does not adhere to glass, you can play a lot closer to the flame with tungston, but this is an awesome tool, Some people never switch.
[Add to Cart]
[View Cart]
|
Tool - Fireworks Bead Rake - Raking Molten Glass
$4.50
Bead rake can be used to manipulate molten glass by dragging, raking, feathering, or swirling the surface. It can be used to make air bubbles or poke holes through the glass. Its bent tip provides for a comfort grip.
[Add to Cart]
[View Cart]
|
Tool - Stainless Steel Bead Rake
$5.00
Stainless Steel Bead Rake. A tool for feathering. A steel poker with 90 degree bend near the end and a wooden handle.
[Add to Cart]
[View Cart]
|
Tool - Kiln Mandrel Rack
$21.50
OUT OF STOCK Kiln Mandrel Rack. (48 Space Total) 24 space Perforated on top and 24 space perforated on bottom tier. Stainless Steel with two levels to rest your mandrels on. All Size Mandrels Fit On This Unit. 6" wide by 2-1/2" deep by 2" tall. This will Fit In all Size Kilns.
[Add to Cart]
[View Cart]
|
Tool - Stainless Steel Tipped Shaping Tool - 7"
$7.00
Tool Is Used for Shaping and Flaring Hot Molten Glass. Stainless Steel Tipped Shaping Tool. This tool has a hexigonal stainless steel tip with a 90 degree point on the end. Back Side of Tool Not Visable is Flat. Use the various edges to put flutes, spirals, surface twists and countless others shapes into molten glass.
[Add to Cart]
[View Cart]
|
Tool - Tungsten Carbide Pick (Probe)(1/16")( 3/32")(1/8")
Tungston Probe, Tungston Pick, this is unlike a bead rake, this does not adhere to hot glass, you use this to drag the glass into a pattern outside of the flame, the flame will burn off the tungston carbide finish, kept out of the flame, this tool will last 4-ever, it's tip is very small, easy for dragging little bits of glass on beads, ect, Tungston is SMOOTH!! This tool is also used to poke small holes in molten glass to make small bubbles in the center of flowers and other intricate tasks performed on Molten Glass. We Have 3 Sizes, Just Select the Size You Would Like.
Tool - Tungsten Carbide Pick (Probe) 1/16 $12.00 [ Add to Cart]
[ View Cart]
Tool - Tungsten Carbide Pick (Probe) 1/8" $17.50 [Add to Cart]
[View Cart]
|
Tool - Enamel Sifter 2" (Large)
$6.75
You use this to sprinkle enamels and Fine Powder Frits onto your molten glass bead for unusual Results!! Large Sifter is 2" Round.
[Add to Cart]
[View Cart]
|
Tool - Enamel Sifter 1 1/4" (Medium)
$5.75
You use this to sprinkle enamels and Fine Powder Frits onto your molten glass bead for unusual Results!! 1 1/4" in diameter and 7/8" deep.
[Add to Cart]
[View Cart]
|
Tool - Enamel Sifter 1/2" (Small)
$5.75
1/2" wide, 1/2" deep, You use this to sprinkle enamels and Fine Powder Frits onto your molten glass bead for unusual Results!!
[Add to Cart]
[View Cart]
|
Tool - Aluminum Frit Tray & Frit Ladle (2-Piece) Large
$22.50
This Frit Tray Fits Nicely in your lampworking area, I have used the larger tools and they take up too much space, We Carry 2 Sizes, this and a Larger version.
Tool is 6 1/2" wide, at widest point of base that sits on the table 4" across top, 2 1/4" High and Dish is 3" Round to gather your frit into a neat Pile easily.
Made Of Heavy Aluminum By Our Toolmaker, Hand Made Tool.
[Add to Cart]
[View Cart]
|
Tool - Aluminum Frit Tray & Frit Ladle (2-Piece) Small
$22.50
OUT OF STOCK This Frit Tray Fits Nicely in your lampworking area, I have used the larger tools and they take up too much space, We Carry 2 Sizes, this and a Larger version.
Tool is 5 1/2" wide, at widest point of base that sits on the table 2 1/2" across top, 2 1/4" High and Dish is 3" Deep from top point to table, Perfect size for lampworking to , comes with Ladle 2 1/2" round to push your frit together into a neat Pile easily. Made Of Heavy Aluminum, Hand Made Tool.
[Add to Cart]
[View Cart]
|
Tool - Toyo Comfort Grip Glass Cutter
$23.50
I sell the cutters That I use, That Means There's Only One Cutter That I think Is Worth Selling. (TOYO) If You Want The Best Right From The Start!!This straight pencil like cutter is great for cutting your curved pieces of glass, You Have full control of where the blade is going, Oil Fed Of Coarse!!
[Add to Cart]
[View Cart]
|
Tool - Bead Hole Cleaning Device (Reamer) 5-Piece
$11.50
OUT OF STOCK 5-Piece Bead Cleaning Tool.
Bead Cleaning Devise comes with a wooden Handle & 4 Inter-changeable diamond tips (Very High Quality) These Tips are Nicer than the Old bead Cleaners I carried and 6.50 cheaper with an extra tip to boot!! This comes with 1 slim diameter Tip, 0-2MM and 1 3/4" Long, also, 1 Thicker Bit for wider Holes, 2 3/4" Long, starts at 0-4MM, & 2 Different Pointer and Round Tipped Shaping Bits for cleaning the end holes up if yu have any burrs on your beads. All 4 are quality diamond bits and all you need with these for a perfect cleaning job is water, they really work very well. These Can be used in Your dremel or Generic Dremel Tool. Super Deal, Bits are Nice Quality Reamers. I also carry the extra bits for these.
[Add to Cart]
[View Cart]
|
Tool - Tungsten Bent Rake PROFESSIONAL (Drag Your Glass)
$20.00
Tungston Bent Rake
This allows you to drag very precisely through molten glass, 3/32" in diameter, this is unlike regular beadmaking tools, This is a High Quality Tool, this does not adhere to hot glass, you use this to drag the glass into a pattern outside of the flame, the flame will burn off the tungston carbide finish, kept out of the flame, this tool will last 4-ever, it's tip is very small, easy for dragging little bits of glass on beads, ect, I kept one for me and have allready used it, what a difference from the bead rakes they sell!!
Tungston is SMOOTH!!
This comes with a nicely made handle with an adjustable clasp like a dremel, comes in 2 pieces. You adjust the rake where It's Comfortable for yourself.
[Add to Cart]
[View Cart]
|
Tool - Peters Tweezers - Stainless Steel Glass Hole Maker
$8.50
OUT OF STOCK The Peters Tweezers is a dual purpose tool. Originally, the tool was designed to symmetrically locate the eye locations on fish beads, but it also excels at quick and very easy to make loops and holes for pendants, vessels and buttons.
Standard designed tweezers have their tips run parallel to each other. These specially modified tweezers have their pointed ends bent around so that the very end of their points point directly at each other. To Read More Just Click!!
[Add to Cart]
[View Cart]
|
Creation Station (Butterfly Model)
$88.88
OUT OF STOCK Creation Station Butterfly Model
Designed to give ultimate Wrist Rest & Elbow Support for Beadmakers. Two rest wrists are fully adjustable to customize support you wherever you need it! Wrist rests also can be folded down if the need arises.
Universal Torch Clamp will secure any oxygen/propane torch, or can be reversed to secure a Hot Head torch using either Mapp gas canisters OR bulk fuel hose. Elbow Rests extend the work area and thin pads are supplied for comfort. The Torch Plate, offering a Stainless Steel heat-proof surface can be secured to your worktable with screws (provided) or can be clamped to your work bench using the bar clamps (below). Many people obtain a plywood surface onto which they can screw down their Creation Station. The board can then be clamped to your table if you do not want to permanently attach the Creation Station to your table.
Complete instructions and adjusting hardware are included. Torch is not included; shown for scale only.
The new Butterfly Model is more compact than previous models, which makes it easier for travel, and the torch plate is now made of stainless steel.
[Add to Cart]
[View Cart]
|
New Arrivals (Updated 10-16-2008)
|
www.Jodelglass.com ( Home Page )
|
Graphite Torch Marver For "Carlisle's Mini CC"
$28.95
Graphite Torch Mount Marver (Mounts Easily) on top of "Carlisle's New Mini CC"
[ Add to Cart]
[ View Cart]
|